Sixgun Stocks

Originally published at: Sixgun Stocks – SIXGUNS



Every handgunner knows purchasing the sixgun that will fill a
need, either real or imagined, is only the first step. Every good gun
deserves good leather and good grips. A few years back it was
impossible to find good usable stocks, or grips, on very many factory
sixguns especially those of the double action persuasion. Today that
has all changed. Both Smith & Wesson and Colt gave up trying to
supply wooden grips that would suit anyone and instead have gone to
highly functional rubber grips from Hogue, Pachmayr, or Uncle Mike’s
for most of their mainline sixguns. Ruger’s GP-100 and Super Redhawk
Models feature rubber grips also with wooden insert panels to fancy
them up a bit.

Even with the improvement in factory stocks there are still enough
sixgunners interested in personalizing their sixgun with special
stocks to keep several grip makers very busy. Some need grips to
improve the handling of their sixguns; others simply want to dress
that special revolver up a mite. In addition to this, cowboy
shooting, which is not only a shooting competition but also a
competition of another sort, that of seeing who can dress the most
authentically or flamboyantly, almost requires fancy grips for fancy

Grips can be had in rubber as mentioned, fancy and exotic woods of
all kinds, laminated woods, micarta, polymer, staghorn, both
imitation plastic and natural, and the two premium materials, ivory
and ram’s horn.

When I started sixgunning I discarded several pair of imitation
staghorn grips. Plastic grips such as found on the Great Western
sixguns of the 1950’s and also in many “B” movies riding on pre-War
Colt Single Actions. Today I search gun shows for boxes of grips in
the hopes of finding those same style old plastic stag grips that can
be fitted to current replica sixguns for cowboy shooting. True
staghorn is a great choice being tougher than ivory, a whole lot less
expensive and a certainly able to withstand tougher conditions than
either ivory or mother of pearl. However staghorn is often supplied
too thick and rough for my tastes. They can be left rough or thinned
down and smoothed with the result being a look much like old bone

Micarta is a tough synthetic material from the electronics
industry that makes superb grips. In the past one could get both
ivory and black micarta. The ivory micarta even ages like real ivory
turning a deep yellow color in the process. The bad news is ivory
micarta is now hard to come by however the black micarta is still
available and makes very good looking and durable stocks especially
for stainless steel hunting handguns.

In the past I have often written about sixgun stocks from Charles
Able and Deacon Deason (BearHug Grips). It is our great loss that
Charles is now retired from gripmaking and Deacon has gone Home. I
use many grips from both of these craftsman and a big hole now must
be filled. Let us look at those who are filling the hole and some of
the excellent grips that are available for sixgunners today whether
for looks, improved handling, or both.

AJAX: Ajax Custom Grips offers a full line of custom stocks for
sixgunners including stag, ivory, and mother of pearl. Ajax stags are
on two of my single action sixguns, a Ruger Super Blackhawk and a
Colt Single Action Army. Many suppliers of stag grips seem to think
more is better and the result is overly thick stocks that are very
sharp and only usable on mildly recoiling sixguns. Stags from Ajax
that I have experienced are already of the proper width without the
rough surface found on many stag stocks. They are also slightly
oversize to allow a perfect fit to each grip frame.

For cowboy shooters who want an inexpensive grip that is also
tough and good looking, Ajax offers grips made of four synthetic
materials, ivory polymer, pearlite, black pearlite, and staglite, all
designed to replace the costlier ivory, pearl, and stag stocks. These
grips provided by Ajax are also slightly oversize to be hand fitted
to each individual grip frame as there is considerable variation in
the dimensions of factory grip frames on both Colt and Ruger single

For those who prefer a more traditional grip of natural material,
Ajax also offers a line of wood grips for most revolvers in walnut,
cherry wood, and black silverwood and are also one of the few sources
of genuine African Elephant ivory. These grips must be special
ordered and custom fitted to each individual handgun. Ajax is also
the only supplier I know of that offers stocks for the original Ruger
Blackhawks, the XR-3 grip frames that were standard on the .22
Single-Six and .357 and .44 Magnum Blackhawks from 1953 to 1963,
without requiring custom fitting.

JOHN BEASLEY: Wild Best Grips from John Beasley are a direct
result of the great interest in cowboy shooting. Nothing dresses up a
sixgun better than ivory stocks however ivory is very expensive and
also quite fragile. Both of these attributes makes one think twice
about using ivory grips in the demanding sport of cowboy shooting.
The obvious answer is synthetic grips that look like ivory without
the attendant expense or need to be extremely careful when handling
them. Beasley offers ivory style stocks that feature 19th century
style carved motifs for all the replica sixguns.

Currently Beasley offers 11 designs all of which look like they
came right off of Old West sixguns. The Western enthusiasts has five
choices of eagles, the Mexican Eagle, the Hickok Eagle, the Williams
Eagle, the Custer Eagle, a Flying Eagle and an Eagle Wing. The
Mexican Eagle, with an eagle holding a snake in his beak, is
exceptionally good looking on single action sixgun grips. Other
designs include a Running Buffalo, two different Longhorns, a
Rattlesnake, coiled and ready to strike, and a Buffalo Skull.

All Beasley grips are supplied in kit form, oversize and requiring
hand fitting to each individual sixgun with pin holes being drilled
and escutcheons fitted for two piece grips or gluing of center spacer
to each panel for those grips that are one piece style. Currently,
designs are available for Colt Single Actions and replicas, the
Schofield, Ruger Bisley, and New Thunderer. All designs are not
offered for every sixgun. BLUMAGNUM: Tedd Adamovich runs the one man
BluMagnum shop offering custom fitted one and two piece style grips
for single actions, Colt, Freedom Arms, Ruger, Texas Longhorn Arms,
and all replica single actions. Nothing looks better on a Colt Single
Action than one-piece grips with no screw hole in the middle.
Materials offered by BluMagnum are walnut, plain and fancy, exotic
woods such as tulipwood and rosewood, ivory and black micarta, and
genuine staghorn. Both workmanship and materials are of the highest

I’ve worked with Adamovich in coming up with what we believe is
the perfect grip for single actions with the proper diameter, shape,
and feel, so ordering grips from BluMagnum will give the sixgunner
what I consider the best possible single action sixgun grip. Thicker
or larger grips are available on request. BluMagnum also provides a
grip for Ruger and Freedom Arms hard kickin’ Magnum sixguns that
fills in behind the trigger guard and does an admirable job of
keeping felt recoil to a minimum. I also worked with Adamovich on
this design and we have tried to come up with stock that handles
recoil without being overly bulky.

I often get requests for information about the stocks that were
offered by Deacon Deason as the Skeeter Skelton design. As mentioned
earlier, BearHug Grips are no longer made as Deacon went Home in 1994
and those grips have not been available since. By the time you read
this, BluMagnum expects to have set up all the machinery to provide
stocks for double action sixguns. These grips will fill in behind the
trigger guard and be shaped for easy handling and control of felt
recoil using the same materials as for their single action sixgun

EAGLE GRIPS: Eagle catalogs Oversize stocks in both rosewood and
ebony wood for double action sixguns that are very close to the
Skeeter Skelton style I have preferred in the past. Oversize stocks
are available in both checkered or smooth finger groove style in
addition to standard smooth grips. Rosewood Oversize grips from Eagle
are now right at home on my nickel plated Model 19 .357 in the smooth
style while finger groove checkered rosewood Eagle grips now reside
on a Smith & Wesson Model 629. Dark colored rosewood stocks look
exceptionally good on stainless steel sixguns.

Eagle also offers genuine ivory, including carved designs,
staghorn, buffalo horn, and mother of pearl grips for most single
action sixguns. Buffalo horn is from the Indian buffalo and is a
shiny black finish that looks very good on stainless or nickel plated
sixguns. Eagle’s answer to the ‘boot style’ grip is their concealment
stock design known as the Secret Service. These tiny grips are of
finger groove style in rosewood or ebony with or without checkering.
They combine a very small size for concealment with finger grooves
for control. The backstrap and bottom of the butt are left open,
while two finger grooves fill in the front strap. They go well with
the round- butted grip frame now offered by Smith & Wesson on all
their sixguns. The Secret Service grip style from Eagle conceals
easily and is as small as a grip can be and still be practical for
shooting a big bore sixgun.

ROY FISHPAW: Fishpaw, through his shop, Custom Gun Grips, is
recognized as the Master when it comes to providing stocks for all
makes and styles of handguns, single action, double action, and semi-
automatic. Not only are all manner of exotic woods available,
including the most mouth watering fancy walnut imaginable, Fishpaw is
also one of the few sources for ivory and the very hard to come by
rams horn. The latter, taken from the horns of a bighorn sheep,
provides yellowish colored stocks that almost seem to be translucent,
and is highly prized and extremely beautiful.

Fishpaw has a perfect feel for what a sixgun grip should be and
his work is absolutely flawless and as close to perfect fit as is
humanly possible. The fancy walnut grips ordered from Fishpaw for my
Ruger Blackhawk and Smith & Wesson .357 Magnum are prized
possessions. The latter is not only able to handle felt recoil well,
it is also a work of art while the curve filling in behind the
trigger guard can only described as exquisite.

HERRETT’S: Steve Herrett was a handgunner of the highest order.
Winner of the Outstanding American Handgunner Awards Foundation
bronze and designer of the .30 Herrett and .35 Herrett cartridges for
the Thompson/Center Contender, Herrett founded Herrett’s Stocks more
than 40 years ago. Today, Herrett’s is in its second generation and
headed up by Rod Herrett.

Herrett’s works only in wood offering several classic designs. The
Trooper, designed by Steve Herrett, fills in behind the trigger guard
and along the backstrap of double action sixguns. Lightly checkered,
Troopers provide a non-slip grip for hard kickin’ Magnums. My first
pair purchased in the early 1960’s is still going strong and now
bolted onto a Smith & Wesson Model 25-5 .45 Colt.

Herrett enlisted the aid of Bill Jordan in coming up with a grip
for fast and easy shooting of double action sixguns. The Jordan
Trooper stock completely encloses the front and backstrap and is
rounded with no sharp edges anywhere with a smooth finish, no
checkering allowed. This is an excellent grip for shooting such hard
kickin’ sixguns as the Smith & Wesson .44 Magnum . A third
standard design from Herrett’s is the Roper designed by Walter Roper
well before World War II. Roper, a dedicated handgunner, came up with
the grip that eventually became the Smith & Wesson target grip in
its purest form, not the square shaped and blocky aberration offered
in the 1970’s and 1980’s.

Roper’s design features an open backstrap and fills in behind the
trigger guard. Skeeter Skelton took the Roper design and changed it
ever so slightly, mainly by changing the curve of the front strap and
flaring the butt very subtlely. Finally, Herrett offers the Detective
design. Originally for use on small frame sixguns as their name
indicates, the Detective, a round butted design that fills in behind
the trigger guard, also works extremely well on Smith & Wesson
round-butted medium and large framed sixguns. Herrett’s also offers a
Custom Shop service. Check with them for your specific needs.

HOGUE: Guy Hogue’s design, the MonoGrip, is unique in that instead
of using two panels bolted to the frame, it is instead a one piece
design that slips on the frame from the bottom of the butt and is
secured by bolting to a stirrup that fits over the factory grip pin.
A tightly fitting and secure way of stocking a sixgun.

MonoGrips are supplied to sixgunners in rubber, laminated woods,
and some of the most beautifully grained exotic woods imaginable.
Most designs are supplied with finger grooves for easy handling of
heavy and hard kickin’ Magnum sixguns. Smooth grips are available on
special order.

Hogue’s has recently entered the cowboy shooting scene with grip
panels for Colt Single Actions and Ruger Blackhawks and Bisleys.
Materials are black and white micarta, as well as exotic woods such
as tulipwood, rosewood, kingwood, and Goncala Alves. Hogue’s single
action stocks are supplied slightly oversize without the grip pin
drilled for custom fitting by each sixgunner to one particular

LETT MANUFACTURING: Lett supplies the grips to Ruger for their
single action and double action sixguns. In addition to this Lett’s
Custom Grip division also can provide special grips for Ruger owners
who desire something a cut above the standard grip.

Recently Ruger started offering ivorylite grip panels with Ruger
medallions for their Vaquero sixguns. Lett can supply these as well
as ivory micarta grips for Blackhawks, Bisleys and Vaqueros including
scrimshawed examples. I have a pair of Bisley grips from Lett with a
scrimshawed elk that fit perfectly on a Custom Stainless .22 Bisley

A lot of variation exists among single action grip frames be they
Colt, Ruger, or replica. I recently ordered two pair of custom grips
from Lett, a pair of fancy walnut with Ruger medallions for a Bisley
and a pair staghorn stocks for the standard single action grip frame
as found on the Vaquero. Bolted to a Vaquero and a Bisley Vaquero,
both in .45 Colt, they could not fit better if they were individually
handcrafted for each frame. In addition to fitting precisely, both
grips are of the proper thickness for easy handling, not the least
bit bulky, and in the case of the stags, having plenty of grain
without being rough to the touch. Nice grips.

PRECISION PRO GRIPS: When I examined Elmer Keith’s sixguns after
his death I found out how he was able to control the felt recoil on
Smith & Wesson’s .44 Magnum without using handfilling stocks that
also filled in behind the trigger guard. Keith used the standard
Smith Magna grip design however on the right grip panel of each of
his sixguns was a carving, he especially liked steerheads and Mexican
eagles, to fill in the palm of the hand and keep recoil to a

Pictures of those original Keith grips were sent to Bob Leskovec
at Precision Pro Grips to see if he could duplicate both a pair of
double action N-frame and Colt Single Action Army grips with the
carving placed exactly as on the Keith sixguns. Leskovec works in an
antique ivory polymer and was able to copy the grips with carved
steer heads to perfection.

Precision Pro Grips can supply custom grips in ivory or antique
ivory acrylic, plain or carved, and also in exotic woods plain or
inlaid with such exotic items as silver snakes. He also is making a
“Roy Rogers” style grip that duplicates the stag grips used by Roy in
so many Westerns. Carried out in polymer ivory and carved to look
like the old stag, they are a great improvement over the old plastic
grips. They look especially “B-Western” on a Ruger stainless

Precision Pro Grips does not turn out stocks on a factory basis
but rather prefers to work with each sixgunner individually. Leskovec
also prefers inquiries by phone rather than by letter.

SMITH & WESSON: With the advent of the first Magnum, the .357
Magnum in 1935, Smith & Wesson offered the Magna grip that filled
in to the top of the backstrap on both sides of the grip frame. These
soon evolved into the target style grip designed by Walter Roper.
This latter style of grip was found on many large framed Smith &
Wessons in .357 Magnum, .45 ACP, and .44 Special chamberings through
the 1940’s and 1950’s. When the Smith & Wesson .44 Magnum came
forth in 1956, it carried this same style of target grip of an exotic
wood from South America known as Goncala Alves.

Then something started to go wrong. The target grips from Smith
& Wesson became blockier, with more pronounced checkering and a
shape that was harder to hold onto. The area behind the trigger guard
which had been filled in ever so smoothly was now dished out and
inadequate to handle felt recoil well. Smith finally shut down their
wood grip section and now supplies rubber grips on all of their
sixguns. Highly functional they may be but they are not as
aesthetically pleasing as other materials. This has now been
addressed by Smith & Wesson with the addition of a new line of
custom grips.

Known as DymondWood, these laminated synthetic grips are made of
veneers of exotic woods combined with a thermoplastic resin to give
them a scratch resistant finish and make them extremely tough and
impervious to wear. Fourteen, yes 14, different colors are offered
from Rosewood to a black and silver finish to a camo pattern with
designs for both round and square butt Smith & Wessons, and in
the small boot grip design for concealment all the way to a hand
filling grip for the big N-frames. I have DymondWood grips on a M60
.357 Magnum, a Model 696 .44 Special, and the new AirLite .22. All
are of the finger groove style and are the best grips offered by
Smith & Wesson in several decades.

We may have differing opinions when it comes to a choice as to the
to best handgun stocks. Standard or handfilling, smooth or checkered,
finger groove or regular, synthetic or genuine. Whatever the itch may
be, one of these stockmakers can scratch it.


Ajax Custom Grips, 9130 Viscount Row, Dallas TX 75247;

John Beasley, P.O. Box 423, Nemo TX 76070 (Note: John Beasley sold
his company last year and it is now owned by Larry Little of
Gripmaker (

BluMagnum, 5960 Wilson Rd., Colorado Springs CO 80919;

Eagle Grips, 460 Randy Rd., Carol Stream IL 60188;

Roy Fishpaw, 793 Mt. Olivet Church Rd.
Lynchburg, VA  24504

Herrett’s Stocks, P.O. Box 741, Twin Falls ID 83303;

Hogue Grips, P.O. Box 1138, Paso Robles CA 93447; 800-438-4747

Lett Custom Grips, 672 Currier Rd., Hopkinton NH 03229;

Precision Pro Grips, 4429 Stanton Ave, Pittsburgh PA 15201;

Smith & Wesson, 2100 Roosevelt Ave., Springfield MA 01102;

1 Like

I see you’re running into some of the same issues moving articles as I did, example misc. hard stops in all the wrong places.
I first stared deleting them manually, then tried find and replace, something i didn’t try was saving as plain text before opening in the ftp editor or other, that might remove the formatting.


I’ve done zero actual editing and been full on trying to make things work, got this far by finding a ton of ways things don’t work, right now I’m back to the video side, I eat a few bites off one plate and move to another, then back, all while doing two other non related but important projects